Popular Articles
How to emulate BLE beacons using NAO logger
Introduction This "HowTo" will enable you emulating BLE beacons using the NAO Logger. This allows remote debugging. You will be able to obtain a blue dot from the NAO SDK as if you were on site. Do not use this feature on site, as this might affect ...
How to Apply a Configuration to a Tag Using NAO Logger
This article explains how to assign and apply a configuration to a Tag through NAO Cloud and finalize the process with the NAO Logger app. Step 1 – Assign a Mission in NAO Cloud Log in to NAO Cloud. Go to Tag Tracking > Tracked Device Select the ...
How to use the in-app debug feature
Introduction The objective of this feature is to record a scenario/behavior/trajectory directly from within the final app, for future analysis and replay (replay using the in-app log replay). Step-by-step instructions Pre-requisites NAO Logger 4.10+ ...
Change the Configuration of Beacons using OTA Mission
Introduction The default configuration of Pole Star NAO BlueSpots can be modified with the help of the mobile application NAO Logger. However the configuration can only be defined by Pole Star delivery team. Definition of new configuration is ...
How to connect to your site on NAO Logger
Purpose NAO Logger is a Pole Star application used to deploy, maintain, customize, demonstrate and test the performance of its localization solutions. It is the field extension of the NAO Cloud platform. All your sites created on NAO Cloud are ...